A.Agalya, A.Akash, K.Alexander, A.Joeaginraj and A.Vijaya Harish krishna
This Paper involves that Automation of Humidification Plant in textile Application – Humidification is the critical parameter, which defines the quality of the yarn. Here there are two Axial Flow Fan which absorbs fresh air from atmosphere through Inlet Damper and passes to Louver here it reduces the flow of dust particle. In between Louver and Mist Eliminator water storage tank is there, through pump it spray water for cooling the warm and moist air flow from Louver. Then passes into Mist Eliminator which eliminates water particles and send cool air into Duct. Through Duct the air flow into Spinning and Conning sections of Humidification Plant for maintaining the Humidity. Dust and Air from plant get discharged from trench through exhaust fan through Outlet Damper. To maintain Humidity of Spinning and Conning Section in between 35-50 RH. If inside the department RH% is below set value .Now the pump starts automatically and cool air flow inside Relative Humidity reaches maximum set value .Then the pump goes off automatically. This will continue throughout the day and maintain the inside Relative Humidity with in the set limit.
Relative Humidity, Damper, Mist Eliminator, Axial Flow Fan.